Optical Bonding Competence
Optical bonding enables the connection of the touch sensor, cover glass and display to one unit using different bonding technologies.
SCHURTER has continuously developed its bonding capabilities in-house and expanded it with a wide range of investments regarding pretreatment and glass cleaning as well as in the bonding process.
Benefit from the various bonding technologies and our know-how in order to get the best solution for your customized application.
Benefits of Optical Bonding
• Optical Bonding eliminates the reflections between display and
touchscreen / front glass. The refraction of light is reduced,
thus increasing the contrast and the optical brilliance.
• By eliminating the air gap between the components no moisture
No dust and dirt particles
• By eliminating the air gap no dust and dirt particles can penetrate.
• A touch panel with Optical Bonding has an increased stability
and resistance to mechanical effects such as pressure, impact or
vibration. This way of installation significantly reduces the risk of
glass splintering or breakage.
Improved heat dissipation
• By filling the insulating air gap between the components, heat can
be derived to the outside.
• The eliminated air gap between touch and glass has a positive
impact on touch detection and functionality, and the controller
does not need to constantly recalibrate due to the static connection
Bonding Possibilities for touchscreens
Air Gap Bonding
In this process, the display is glued all around with an adhesive frame directly behind the sensor or on the printing of the coverlense in the clean room. An air gap between the display and the sensor / coverlense remains.
Air bonding is a simple and cost-effective way to connect displays with coverlenses or touch sensores. Depending on the application, the assembly takes place with single adhesive strips or with a closed adhesive frame.
Liquid Optical Clear Adhesive (LOCA) Bonding
The air gap between the display surface and the rearside of the sensor is filled with a UV liquid adhesive. The adhesive is silicone-free, non-aging and UV stable. The liquid adhesive is applied over the cover glass and then bonded to the touch panel or TFT panel. The adhesive is spread evenly ...